Telehandlers

Forklift, Reach 19' 5,500#

Image for reference only
Actual item may look different
Click on image for larger view

Click on above thumbnails for alternate view

Manufacturer: Genie Industries

Model: GTH-5519

Quantity:

Additional Information

Genie Telehandlers
GTH-5519
Specifications
Model GTH -5519
* Weight will vary depending on options and/or country standards.
** Load ratings vary depending on attachment.
Measurements US Metric
Maximum lift height 18 ft 10 in 5.74 m
Maximum forward reach 11 ft 3 in 3.43 m
Reach at maximum height 1 ft 10 in 0.56 m
Height, stowed 6 ft 6 in 1.98 m
Length, stowed (without forks) 12 ft 3 in 3.73 m
Width 5 ft 11 in 1.80 m
Wheelbase 7 ft 6 in 2.29 m
Ground clearance, center 1 ft 2 in 0.36 m
Ground clearance, axle 10 in 0.25 m
Fork cross section 1.6 x 4 in 40 x 100 mm
Productivity
Maximum lift capacity 5,500 lbs 2,495 kg
Lift capacity at maximum height 4,400 lbs 1,996 kg
Lift capacity at maximum reach 1,900 lbs 862 kg
Drive speed 15 mph 24.1 km/h
Draw bar pull 10,250 lbs 4,649 kg
Break out force 8,100 lbs 3,674 kg
Turning radius, outside (4WS) 11 ft 3.35 m
Auxiliary hydraulic flow 17 gpm 64 lpm
Auxiliary hydraulic pressure 3,918 psi 270 bar
Tires, standard size 12 x 16.5 in, 10 ply
Power
Power source Deutz TD 2.9 L04 Tier 4f diesel 74 hp (55.4 kW)
Electrical system System voltage 12 volt
Alternator 95 amp
Battery 720 CCA at 0 F (-18 C)
Hydraulic tank capacity 18.5 gal 70 L
Hydraulic system capacity (w/tank) 31.7 gal 120 L
Fuel tank capacity 15.8 gal 59.8 L
Weight*
10,360 lbs 4,700 kg
519 JLG
___________________________________________________________
Rated Capacity 5,500-lb / 2,495-kg
Maximum Lift Height 18-ft 7-in / 5.7-m
Load at Max Height 4,400-lb / 1,996-kg
Maximum Forward Reach 10-ft 10-in / 3.3-m
Load at Max Reach 1,900-lb / 862-kg
Lift Speed (Boom Retracted) Up 7.2 sec
Lift Speed (Boom Retracted) Down 5.6 sec
Boom Speed Extended 7.2 sec
Boom Speed Retracted 5.0 sec
Top Travel Speed (4-Speed) 15 mph / 24.1 km/h
Drawbar Pull (Loaded) 10,300-lb-ft / 46.7-kN
Outside Turning Radius 126-in / 3.2-m
Operating Weight 10,400-lb / 4,717-kg
Engine
Make and Model Deutz TD2.2 L3
No. of Cylinders 3
Displacement 134 cu in / 2.2 L
Gross Power Basic 60 hp / 44.5 kW
Maximum Torque @ 1600 rpm 151-lb-ft / 205 Nm
Fuel Tank Capacity 18.5 gal / 69.3 L
Transmission; Hydrostatic
Axles: High bias limited slip differential on front axle.
Planetary on front and rear axles.
Brakes
Service brakes are inboard wet disc brake on front axle.
Parking brakes are wet disc spring-applied hydraulic release.

Also check the following item(s) related to the above:

* Please call us with any questions about our forklift reach 19 foot 5 500 rentals in Los Angeles, Orange, San Bernardino, San Diego, and Riverside Counties, Santa Fe Springs, Sun Valley, or Corona California.